How to cover floors and furniture with sheets before whitewashing the house

How to cover floors and furniture with sheets before whitewashing the house

If the time has come to whitewash the house's walls, you will likely have to start covering the floors and some furniture with sheets.

You cannot skip this step for any reason. Otherwise, you will have to scrape the floors and try (in vain) to remove pieces of caked paint.

There are specific towels on the market that are adapted for this function. However, the problem often is not placing the towels but how to position them so that the "whole world" does not get dirty.

If it is an empty room without furniture, it is advisable to adapt the sheets according to the size of the room and in a completely uniform way to prevent uncovered spaces and paint from falling on the floor.

Another little tip

When you position the sheet, ensure it remains adherent to the floor and does not get damaged. Taping over the tarp might be a good idea. So, it stays even with the floor.

In addition to using the towel, he also uses sheets of thick cardboard, being careful not to slip. This will be useful, especially if you have to place cans of paint, rollers or brushes that could easily stain the whole environment.

If you have difficulties or little time to devote to these jobs, I suggest you entrust yourself to a company.

How to whitewash the house without damaging the floor or the furniture?

How often have you thought about painting the walls of your home, but the idea of ​​finding paint stains on the furniture and dust everywhere made you give up?

How can I blame you? Deciding to paint your home yourself can be very challenging, and without the right organization, you risk making a mess.

Here are some small tricks to follow to avoid damaging the furnishings and floors before whitewashing the walls.

PAINTING THE HOUSE: HOW TO PREPARE THE ENVIRONMENT

Before starting to whitewash, free up the space and organize the environment: This is the only way you'll be able to work easily and protect the furnishings, fixtures and all the elements that could get damaged.

First, gather all the furniture in the center of the room and cover it with a plastic sheet. To facilitate this operation, you can place sheets or rags under the legs of heavier furniture (such as the sofa or sideboard), so you can move them with much less effort and without scratching the floor and also use floor protection roll.

For workmanlike work, remove the external plates of the sockets and insulate the switches. Then, you will avoid staining them with accidental brush strokes, streaks or drips.

PAINTING THE HOUSE: PROTECTING THE FLOORS

Once the furnishings have been sheltered, the floors must be protected. Covering the floor may seem like a long and tedious job, but you will find that it will save you a lot of time and avoid the unnecessary effort of cleaning everything after the job (removing the paint stains once dry is much more tedious!)

To cover the floor, you can use different materials:

Recycled rags

We advise purchasing practical rolls of recycled rags to cover more delicate surfaces, such as parquet or terracotta. This material is usually used in workshops or for rougher jobs, but it's also perfect for absorbing paint stains, which are inevitable when whitewashing walls. In addition, it is easily available in DIY centers at a very low cost.

Cardboard

To protect the floors, you can use simple cartons or buy thicker and more resistant cardboard sheets, perfect for protecting marble floors and all surfaces that need breathability (remember to place the corrugated part in sight).

Thin plastic sheeting

The classic thin plastic cover sheets are the cheapest and least effective solution. They are not very resistant. In addition, they are awkward to position and tear easily. Therefore, they are indicated only for quick jobs and small touch-ups. Once you have chosen the protective and packaging material, secure it to the floor with paper tape and make sure not to leave even an inch uncovered.

Visit https://www.britwrap.com/ to buy protective packaging related stuff.

PAINTING THE HOUSE: PROTECTING THE FURNITURE

After placing the furniture in the center of the room, you can cover it with thin plastic sheeting or with sheets which, if on the one hand, are less effective for preserving the floors from paint, on the other hand, they are really useful for protecting the furniture from dust that is created during the whitewashing works.

Using masking tape, make sure to cover the window frames, doors and even all the baseboards (do not use clear tape or packing tape because they leave a residue that could ruin the surfaces).